Tankless Propane Gas Hot Water Heater 10L Instant with Rain Cap Portable Shower

  
Enjoy an instant hot shower anywhere with CB462WB. 0.25 BAR LOW WATER PRESSURE STARTUP - CB462WB only needs a starting water pressure of 0.25 bar, suitable for low water pressure areas, such as camping, RV, horse washing, etc. Ingited by 2-D cell batteries, great for off-grid areas. INSTAND HOT WATER, DUAL FUELS SUITABLE - CB462WB delivers 10 litres of hot water per minutes. Provide a 37 mbar regulator for propane calor gas cylinder with 27 mm clip-on connector. Or you can also use it on a butane gas bottle by using a 28-30 mbar gas regulator (not included) as needed. WEATHERPROOF RAIN CAP - The stainless steel rain cap design can prevent rain, leaves, and dust from entering the water heater, extending its lifespan.

Drain plug can prevent water pipes from clogging, freezing and bursting. EASY TO INSTALL & USE - The water heater is equipped with basic installation accessories, which is simple and convenient to operate.

The LED temperature display can help you adjust the temperature you want more clearly. CE CERTIFIED GAR STANDARD - To provide a safer bathing environment, CB462WB gas water heater is equipped with several protection configurations, such as flame protection, overheat protection, 20 mins safety shutoff protection. Product Specifications Max Hot Water Output:10 litres per minutes Overheat Protection:at 80°C Power Output:20 kW Gas Type:Propane gas or butane gas Gas Pressure:37mbar for propane gas or 28-30mbar for butane gas Power Source:2 D-cell batteries Average Battery Life:? 180 days Applicable Water Pressure:0.258 bar Gas Fitting Nut:1/2" BSP Water Fitting Nuts:1/2" BSP Product Size:330 x 184 x 735 MM Product Weight:8.5 kg Included Components:Shower head with 150cm hose, gas regulator with 150cm hose, installation kits, instruction manual Multiple Protections:? Flame failure protection, anti-dry combustion protection, over heating protection, anti-freezing protection.

Easy to Install and Operate. Mount on the Wall Mount the gas water heater on the wall or other non-flammable surface with the provided installation kits.

Water Inlet and Outlet Connections 1. Attach the shower kit (provided) to the hot water outlet. Attach the water hose (not provided) to the cold water inlet. Adjust the water flow rate via the button on the shower head. 3 sprays for your choice.

Gas Inlet Connection Attach the provided gas regulator to the propane gas cylinder. Check carefully gas leaking by spraying soap solutions on all gas joints.

Note: The provided gas regulator is for propane gas bottle with 27mm clip-on connector. You will need another 29 or 30mbar gas regulator for your butane gas bottle. Insert 2 "D" size batteries (not included) in the battery compartment. Make sure the direct of the batteries is correct. Open gas valve and switch on the shower head, water flows, water heater turns on automatically.

Please just enjoy your hot shower instantly with CB462WB. What gas is this appliance suitable for? Propane or butane gas bottles. The supplied gas regulator is for propane gas bottle.

You will need another 30mbar gas regulator if you use the appliance on butane gas bottle. What else do I need to install this gas water heater? You will additionally need a LPG bottle, 2-D-size batteries, inlet water hose. If your local water pressure is low (under 1 bar) or the inlet water source is a water tank, you will need another water pump and 12V power source. Where can this product be used?

It is recommended to install this product in a well-ventilated place, such as outdoors, garden, balcon, horse stables, ect. How can I adjust the water temperature? Heat is to be adjusted via the gas knob and water knob. Outlet water temperature was related to the inlet water temperature and outlet water flow rate.

Can I use this to heat my hot tub? Yes, this model can produce hot water of 10 litres per minute. Please reserve enough heating time for your desired temperature.