CAMPLUX 10kW 5L Portable Tankless Gas Hot Water Heater with 4.3L Water Pump 12V

  

2 choices for water inlet sources. Water feed from water tank.

Water feed from water mains. Enjoy an instant hot shower anywhere with CAMPLUX AY132P43.

The best time to engage yourself into a road trip, camping, swimming or underwater activities with your families and fellows. What a fantastic enjoyment if you get a comfortable instant hot shower after you enjoy the relaxing moments wherever you are. With a folding handle, it is so convenient to carry anywhere and install on the trailer, RV, caravan or campsite in minutes without professional help. Configured with a 4,3L water pump, you can use the appliance even in low water pressure areas.

Every piece of CAMPLUX gas hot water heater goes through rigorous tests during manufacturing and your safety is guaranteed due to advanced multiple protection configurations. ENJOY TANKLESS & ENDLESS HOT WATER - Delivering 5 litres of endless hot water per minute when the shower head is on. You can enjoy hot shower, give a comfortable hot spa for your horses or pets with this portable outdoor shower. MULTIPLE PROTECTION - Flame failure protection, overheat protection, oxygen depletion safety shutoff protection to ensure your family safety.

Drain plug is applied to drain the residual water from the appliance to avoid being frozen or broken. Unlike the storage water heater, this tankless water heater only heats the water in amount for you need.

No need to be preheated, thus eliminating the waiting time for hot water. FOLDABLE HANDLE FOR EASY CARRY- This gas shower only weighs 4.54kg, with a handle, which let you easily carry it anywhere. The 37mbar CE gas regulator is compatible with any propane gas bottle with 27mm clip-on connection. EASY TO OPERATE - You can simply adjust the water and gas flow to achieve your desired temperature.

Configured with a 4.3L water pump to boost the water pressure, it is great for campersite, RV, stables with low water pressure. We provide a 37mbar CE approved gas regulator for quick installation to the propane gas tank. Please be aware that the gas regulator provided is only compatible with the propane gas bottle with 27mm clip on connection. If your tank cannot meet this standard, another gas regulator is needed. Please fill the water inside the hose and pump for the first usage of the water pump. Easy to Set Up & Use.

Mount the gas water heater on the wall with the provided installation kits. Connect the provided gas regulator to the propane gas cylinder. Connect shower hose and shower head to the hot water outlet. Connect the water pump to the water inlet nut on the appliance.

Connect the water pump to the water sources and hose and then connect the hose to the water inlet. Insert 2 "D" cell batteries in right direction. Turn on gas valve and water valve, switch on the shower head and enjoy instant hot water! Easy to Install and Operate. Mount the gas water heater vertically against the wall or other non-flammable surface using the included mounting kits. Attach the shower kit (provided) to the hot water outlet. Adjust the water flow rate via the button on the shower head. 3 sprays for your choice. Connect one water hose to the water inlet fitting nut of the appliance and the outlet side of the water pump. Connect one end of another water hose to the inlet side of the water pump and the another end to the water tank. Please note: It is recommended to fill the feed pipe with water and to keep the feed pipe above the pump at all times to ensure that no air enters the pump.

Attach the provided gas regulator to the propane gas cylinder. Check carefully gas leaking by spraying soap solutions on all gas joints. Note: The provided gas regulator is for propane gas bottle with 27mm clip-on connector.

You will need another 29 or 30mbar gas regulator for your butane gas bottle. Insert 2 "D" size batteries (not included) in the battery compartment.

Make sure the direct of the batteries is correct. Open gas valve and switch on the shower head, water flows, water heater turns on automatically.

Please just enjoy your hot shower instantly with CAMPLUX AY132P43. Max Hot Water Output:5 litres per minutes.

Gas Type:Propane gas or butane gas. Gas Pressure:37mbar for propane gas or 28-30mbar for butane gas. Power Source:2 D-cell batteries. Applicable Water Pressure:0.257.5 bar. Gas Fitting Nut:1/2 BSP. Water Fitting Nuts:1/2 BSP. Product Size:290 x 110 x 376 MM. Product Weight:4.54 kg. Flame failure protection, anti-dry combustion protection, over heating protection, anti-freezing protection.

Shower head with on/off switch x1. 1500mm Premium shower hose x1. 6800mm Cigarette lighter cable x1. 1100mm Alligator clip cable x1.

What gas is this appliance suitable for?? Propane or butane gas bottles.

The supplied gas regulator is for propane gas bottle. You will need another 30mbar gas regulator if you use the appliance on butane gas bottle. What else do I need to install this gas water heater?? You will additionally need a LPG bottle, 2-D-size batteries, inlet water hose. If your local water pressure is low (under 1 bar) or the inlet water source is a water tank, you will need another water pump and 12V power source.

Where can this product be used?? It is recommended to install this product in a well-ventilated place, such as outdoors, garden, balcon, horse stables, ect.

How can I adjust the water temperature?? Heat is to be adjusted via the gas knob and water knob.

Outlet water temperature was related to the inlet water temperature and outlet water flow rate. How to power your CAMPLUX pump?? The water pump runs on 12V power. You will additionally need a cigarette socket cable so you can plug your pump directly into the cigarette socket port inside your car, or your portable power station.