Enjoy an instant hot shower anywhere with Camplux AY132B. Easy to Install and Operate. Mount the gas water heater on the wall or other non-flammable surface with the provided installation kits. Water Inlet and Outlet Connections. Attach the shower kit (provided) to the hot water outlet.Attach the water hose (not provided) to the cold water inlet. Adjust the water flow rate via the button on the shower head. 3 sprays for your choice. Attach the provided gas regulator to the propane gas cylinder. Check carefully gas leaking by spraying soap solutions on all gas joints. Note: The provided gas regulator is for propane gas bottle with 27mm clip-on connector. You will need another 29 or 30mbar gas regulator for your butane gas bottle. Insert 2 "D" size batteries (not included) in the battery compartment. Make sure the direct of the batteries is correct. Open gas valve and switch on the shower head, water flows, water heater turns on automatically. Please just enjoy your hot shower instantly with Camplux AY132B. Please note: Please drain the residual water out off the appliance when temperature is near or below 0°C. Max Hot Water Output:5 litres per minutes. Colour:White / Black (optional). Gas Type:Propane gas or butane gas.
Gas Pressure:37mbar for propane gas or 28-30mbar for butane gas. Power Source:2 D-cell batteries. Average Battery Life:180 days. Applicable Water Pressure:0.257.5 bar. Gas Fitting Nut:1/2 BSP.
Water Fitting Nuts:1/2 BSP. Product Size:290 x 110 x 376 MM. Product Weight:4.54 kg.
Included Components:Shower head with 150cm hose, gas regulator with 150cm hose, installation kits, instruction manual. Multiple Protections:Flame failure protection, anti-dry combustion protection, over heating protection, anti-freezing protection. What gas is this appliance suitable for? Propane or butane gas bottles.The supplied gas regulator is for propane gas bottle. You will need another 30mbar gas regulator if you use the appliance on butane gas bottle.
What else do I need to install this gas water heater? You will additionally need a LPG bottle, 2-D-size batteries, inlet water hose. If your local water pressure is low (under 1 bar) or the inlet water source is a water tank, you will need another water pump and 12V power source. Where can this product be used?
It is recommended to install this product in a well-ventilated place, such as outdoors, garden, balcon, horse stables, ect. How can I adjust the water temperature? Heat is to be adjusted via the gas knob and water knob. Outlet water temperature was related to the inlet water temperature and outlet water flow rate. Can I use this to heat my hot tub?Yes, this model can produce hot water of 5 litres per minute. Please reserve enough heating time for your desired temperature.